Series 07
Processing
*
Suitability of metallic effects for tribo processing must be
verified prior to application. Please consult with the relevant
Information Sheets, latest edition.
Guide Lines for Application for Rough Texture Matte finish and Hammertones
Any deviation from and modification of the recommended application parameters (e. g. film thickness, cure conditions,
different application equipment) may lead to variations in the texture. Rough Texture formulations are very sensitive to
contamination at the applicator as these contaminations will always “float” to the top of the textured surface. Clean
application equipment as well as a clean spraying environment is of the essence.
It is recommended to apply Hammertone effects at an increased film thickness of 100–120 [µm]. A variation in the cure
parameters as well as heavy mass parts may result in different effects. As the effect producing agents in powder coatings float
differently from those in wet paint, the effects are reproducible only to a limited extent. For an optimum coating and effect
result it is recommended to consistently add virgin powder.
|
 |
troubleshooting
color index
